Jamie, Author at Garage Weld

Do You Push or Pull When MIG Welding? A Shop-Tested Guide

One of the first technique questions that comes up with MIG is do you push or pull when MIG welding, […]

A lot of people hear the term arc welding thrown around in the shop and never stop to ask what

Plasma arc cutting is a process that uses a high-velocity jet of ionized gas (plasma) to cut through electrically conductive

Cleaning an air compressor tank is one of those maintenance jobs that usually gets ignored—until water, rust, or nasty debris

Figuring out how long JB Weld takes to dry in cold weather is something I learned the hard way during

Burn-through is one of those problems that shows up fast and makes you question your settings and technique. Learning how

One of the most common questions I hear from new stick welders is do you push or pull when stick

Comparing plasma arc welding vs TIG is something that comes up once you’ve spent enough time behind a torch and

Welding thin metal with flux core wire is one of those skills that can test your patience fast. Flux core

Coating the inside of an air compressor tank is something that usually comes up after spotting rust flakes in the